Yes, the DJI RS 4 works with the Nikon Z30 — but only Verdict assumes the NIKKOR Z DX 16-50mm f/3.5-6.3 VR kit.
Nikon Z30 has an interchangeable Z-mount lens. With its bundled kit lens, combined weight is 541g, well within DJI RS 4's stated 3kg (6.6lbs) payload capacity per DJI's own product page. Balances and operates normally with no adapter or special setup required.
Conditions for compatibility
Verdict assumes the NIKKOR Z DX 16-50mm f/3.5-6.3 VR kit lens (135g, per Nikon's own product page) -- the lens bundled with the Z30 in its kit configuration. Z30 body (406g, with battery+card) + this lens = 541g. A different, heavier Z-mount lens changes this total -- check your specific lens weight against the gimbal's 3kg limit before buying.
“Approx. 406 g (14.4 oz.) with battery (EN-EL25a) and memory card but without body cap”
“Thin lens design is achieved without sacrificing optical performance, which results in a weight of approx. 135 g. And the adoption of a retractable-lens mechanism that shortens the length when stored results in outstanding portability.”
“3kg (6.6lbs) Payload Capacity With Extended Tilt Axis”
Last verified:
Confidence: high confidence